Ferrule Bracket

Ferrule Brackets are used to support ferrules and other panel connections / inserts in correct position (on the top of face of the concrete).

The Ferrule Brackets are simply and easily installed and secured to the sideforms and support the ferrule template in correct position whilst the concrete is poured.

As concrete sets sufficiently enough the Ferrule Bracket is released from the ferrules and the sideform are removed. This leaves the ferrule tops exposed, on the concrete surface, into which ferrule caps are inserted. After this the concrete is finished over.

Trojan Ferrule Brackets

The brackets are held to the sideforms via uni-bolts and 12 mm (1/2 inch) nuts
Support of ferrules and other insert with the Ferrule Brackets:-

 

Centurion Ferrule Brackets

The brackets are held to the sideforms via Centurion Bolt On Clicker Plates and Knobs. No tools are required for installation and removal.