Centurion Adapters / Connectors

Centurion Riser Clicker

The Riser Clicker Plate is the component connecting the sideform to the sliding riser.

The Clicker is inserted into the rear of the sdeform, close to the base riser position, and turned clockwise to lock in position.

The clicker can easily move left or right along the rail (in the rear of the sideform) to the correct position simply by slightly rotating the clicker anti-clockwise. Rotation clockwise locks the clicker in place.

Once the Clicker is in position the Base Riser is inserted into the Clicker and locked in place with a steel pin.